SILVERFOX Facial Steamer SILVERFOX F-100C Mini

Name: Facial Steamer SILVERFOX F-100C Mini
Brand: SILVERFOX
SKU: 38989
Price: 13500 RSD
Availability: InStock
Rating: 5 (1 reviews)

Code: 38989
|
Pr. code: F-100CAC

| Write a comment

Vapozon - cosmetic device for face and body treatments, works on the principle of releasing water vapor enriched with ozone and oxygen. It is used in cosmetics, to prepare the face for thorough cleaning, which achieves the opening of pores and deep disinfection of all skin types.

Special ozone generator, creates ozone and effectively destroys bacteria on the skin. It softens the dead cells on the surface of the skin, for easier removal during the treatment.

It enhances the micro-renewal of the skin, in order to accelerate the formation of new cells and reduce wrinkles on the skin.

Technical characteristics:

Power: 500 W;
Container 400 ml;
Length of the vapozone handle min 23 cm, max. 38 cm;
Height 25.5 cm;
Base width 19.5 cm;
Ozone function;
Heating to steam in 5 minutes;
Working time 20 minutes;
Use of water: distilled.

Operating mode: 220-240 V, 50/60 Hz, 500 W

Show less

Fill the device with distilled or purified water, until the water reaches the upper limit marked with "MAX" on the container;
Connect the power cable to the electrical network of the appropriate voltage;
Switch the "POWER" switch to the "ON" position - the indicator light on the switch will light up and the water will start to heat up;
After 6 minutes, steam will start coming out of the steam hole on the handle, after which ozone can be activated as needed;
By switching the "OZONE" switch to the "ON" position - the indicator light on the switch will light up and the ozonizer will start working when the "POWER" switch is also in the "ON" position. After that, there will be noticeable atomization and smell along with the vapor;
During operation, the water level in the appliance will decrease as steam continuously escapes. When the water level approaches the lower limit marked with "MIN", first switch the "OZONE" switch to the "OFF" position, then the "POWER" switch and disconnect the device from the electrical network. After 3-4 minutes, pour clean water (between the lower and upper limits) through the opening at the top of the body of the device, and then turn on the device again to continue working.

Recommendations for treatment:

Oily and skin with poor blood circulation:
opening distance 30-35 cm/ treatment time 15 minutes;
Normal skin:
opening distance 30-35 cm/ treatment time 10 minutes;
Sensitive and dry skin:
opening distance 30 cm/ treatment time 5 minutes;
Skin with depigmentation:
opening distance 30-35 cm/ treatment time 10 minutes.