BEAUTY DEVICE Paraffin Warmer YM8005PW

Name: Paraffin Warmer YM8005PW
Brand: BEAUTY DEVICE
SKU: 38327
Price: 7590 RSD
Availability: InStock
Rating: 5 (1 reviews)

Code: 38327
|
Pr. code: YM8005PWAC

| Write a comment

Paraffin warmer YM-8005 used for heating paraffin. Paraffin treatment efficiently opens up the pores and relaxes the muscles. After the completed paraffin treatment, result is hydrated skin. Paraffin heating container is made of aluminium.

Technical characteristics:

Power: 230 W;
Operating mode: AC 220-240 V, 50 Hz;
Required paraffin amount: 2,5 kg;
Device dimensions: 34 x 21.5 x 14 cm.

Packing content:

Paraffin warmer YM8005 (white-purple);
Brush for paraffin application;
Grid for seperating the sludge and preventing direct contact of
client's skin and the device;
Protective lid;
Power Cable.

Note: It is not recommended to use on alergy prone skin, skin with scars or acne.

Show less

Place the device on a flat surface;
Lift the lid, put the paraffin in the device, then put the lid back on the device;
Connect the power cable to the mains;
Press the button to turn on the device. "C55" will flash on the left side of the display. If the temperature is not set within 3 seconds, the warmer will heat up to the automatically set temperature of 55 °C. The current temperature will be shown on the right side of the display.

Heating

Manual heating mode:

Adjust the temperature using the "+" and "-" keys. The automatically set temperature is 55 °C.;
The temperature can be adjusted in the range of 45 °-75 °C. The current temperature will be shown on the right of the display.

Automatic heating mode:

Press the "SET" button to activate the automatic mode. On the left side of the display "H80" will be shown, which means that it will take about 80 minutes to heat the paraffin. The highest temperature is 85 °C and when the paraffin reaches that temperature the warmer will stop heating and the temperature will slowly decrease to 55 °C. When the heating time is up, a beep will sound three times, which means that the paraffin melting is complete.

Recommendations:

When using the automatic heating mode, the ambient temperature and the volume of the paraffin will affect the temperature of the paraffin differently. Check the current temperature when using this mode;
When using the automatic operation mode, the "+" and "-" keys will not work until the "SET" key is pressed to terminate such operation mode;
After use, press the button to turn off the device and disconnect the power cable from the mains.