Connect the adapter to the device and connect the adapter to the adequate power supply.
Immediately after connecting the device to an electric circuit, a sensor activates the diodes under the lamp once a hand is placed underneath, operating for 90 seconds. Once the hand is removed from the area, the light emission stops.
Apart from the mode mentioned above, depending on the required length of gel or permanent polish curing, the lamp can have four other different modes:
• 10 seconds operation mode
• 30 seconds operation mode
• 60 seconds operation mode
• continuous 90 seconds mode
10, 30 and 60 seconds operation modes are activated by pressing the designated mode activation button, marked with a corresponding label (10 s, 30 s or 60 s).
Once the chosen mode has been selected, the diodes will emit light. After the selected time expires, the diodes will stop emitting light.
By pressing the ON/OFF button, the lamp will activate in continuous mode, lasting for 90 seconds. The difference between this mode and “sensor time” is that this mode can be interrupted only by pressing the ON/OFF button, while the “sensor time” mode gets activated and deactivated each time hand is placed or removed under the lamp.
Each mode can be interrupted by pressing its activating button.
